4 Ways to Fix DHCP is Not Enabled for Ethernet

 

A service called Dynamic Host Configuration Protocol (DHCP) is used to assign IP addresses to various devices on a network. It ensures that every device in your network has an IP address that is specific to it. It is generally regarded as a dependable and safe arrangement.

Your router will function as a DHCP server by default. When attempting to connect to a network in the Windows troubleshooter, a warning message stating that DHCP is not enabled for Ethernet is displayed. Users' access to the internet will be restricted as a result. 

This error indicates that your Ethernet connection's DHCP server is not operational, which prevents it from assigning an IP address. Even while this problem seems complicated, it is actually quite simple to correct.

I'll be talking about the 4 Ways to Fix DHCP is Not Enabled for Ethernet in this article. This guide will assist you in resolving this error and ensuring that your internet connection functions normally.

Now let's get started,

1. Enable DHCP Client

As was previously noted, the DHCP client service manages DNS records and provides new IP numbers to devices. 

 

All of the linked computers will be unable to obtain the correct IP address if the DHCP client service is no longer operational. You will get the message "DHCP is not enabled for Ethernet" as a result. 

If your DHCP client service is disabled, it could be one reason why it stops functioning. Thus, you must confirm that the DHCP client service is turned on.

For DHCP client service to be activated,

1. Click "Windows + R" and enter "services.msc"
2. Locate the DHCP client and choose it
3. Modify the Startup type to "Automatic"
4. Save the modifications

 

2. Reset Network 

 

Resetting the network configurations is another way to address the issue if DHCP is not enabled for Ethernet. 

 

Resetting the network configurations is the process of asking the DHCP servers for a new IP address, which replaces the one that is being used.

Resetting the network,

1. Toggle the "Windows + R" key
2. Enter "cmd" as the type. Select Run as Administrator when you do a right-click on it
3. Enter the command by typing it in and hitting Enter

                            ipconfig /flush dns
                            ipconfig /renew

Restart the PC after the network has been rebooted to see whether the problem still exists.

3. Update Network Driver

 

It's also possible that out-of-date network drivers are the cause of this issue. Receiving a new IP address can be problematic if your network drivers are old. 

 

Therefore, updating your network drivers will solve the issue right away. Device Manager, a feature of Windows, updates faulty drivers automatically.

In order to upgrade the network drivers,

1. Type "Windows + R" and enter "devmgmt.msc"
2. Extend the "Network Adapter" option
3. Select "installed network adapter" with a right-click
4. Select "Update Driver"

4. Restart Router

 

Your router will most likely serve as a DHCP server in homes and small networks. In this instance, an error message could be the result of any router issues. 

 

Power outages are one of these issues. Nonetheless, issues are typically resolved by just restarting the router.