Fix USB Device Over Current Status Detected | System Will Shutdown After 15 Seconds

The boot screen error "USB device over current status detected" appears when you turn on the computer. This problem is caused by a faulty USB device or connector, as stated in its message. Some users have also reported sensing a burning smell in addition to this issue.

It is a typical occurrence when constructing a new computer. Your system typically goes down in 15 seconds after this. This is carried out to guard against additional harm to your system. As a hardware issue is typically the cause of this error, there are a few easy fixes that can help you resolve it on your own.


I'll be looking at how to Fix USB Device Over Current Status Detected | System Will Shutdown After 15 Seconds in this article. To resume using your computer as usual, you can attempt these fixes.

Now let's get started,

1. Check USB Devices

This error is most frequently caused by a broken device. Make sure that all of the gadgets connected to your PC are operating correctly before attempting any of the other alternatives provided below. 

 

Removing and reconnecting each USB device individually can be a quick and easy method of identifying the offending device.

2. Check USB Ports

If everything about the linked devices seems normal, the USB ports may be the real issue. Another option is that your computer's USB ports are broken or improperly connected. 

 

Any physical contact or reported use might easily damage the ports. You might attempt to connect the USB devices to other ports in this situation.

3. Check Jumpers

The tiny part that joins your USB port to the motherboard is called a jumper. A jumper is used to connect each USB port. 

 

Therefore, it is necessary to inspect each one to ensure that there are no damages. If any damage is discovered, you must replace them with the appropriate items.

4. Upgrade BIOS

Your computer's firmware model, known as the Basic Input/Output System System (BIOS), ensures that all of the hardware parts are operating as intended. 

 

During the boot initialization, this is the main program that runs. They might not detect the attached USB devices if the BIOS is out of date. 

 

Thus, occasionally changing the BIOS firmware can be all that's needed to fix this problem.

5. Replace Motherboard

It's possible that your motherboard has malfunctioned if it's been used excessively and is sufficiently old. This is typically the result of damaged modules. 

 

You can utilize a different motherboard in the interim to see if the damaged motherboard has to be replaced. In case the motherboard is malfunctioning, it can be necessary to swap it out for a new one.