 |
Memory corruption is typically the cause of this blue screen issue. It's one of those mistakes that could appear out of nowhere. Usually, the computer turns off as soon as the error notice shows.
Thus, your data is at risk, just like with other BSOD issues. And there are other explanations for why this issue could appear. You're not the only one if you find yourself having this issue.
Numerous people claimed to have encountered and resolved the problem. You should be able to resolve this issue on your PC with the help of the remedies listed below.
I'll be going over 10 Ways to Fix Faulty Hardware Corrupted Page in Windows in this post. You can try utilizing Safe mode if this issue stops you from accessing the system.
Let's get started,
1. Check RAM
These kinds of blue screen issues are typically caused by malfunctioning hardware. in particular, a broken RAM.
Numerous people have stated that faulty hardware corrupted page errors can be fixed simply by looking at the RAM. The RAM should ideally be taken out and cleaned with a cloth.
Make sure it is securely inserted into its slot when placing it back. Consider using the memory diagnostics tool to check for any RAM problems if the error still occurs.
2. Perform CHKDSK
A tool called Check Disk Utility (CHKDSK) can be used to check the hard drive for problems. Most disk-related problems are resolved by the scan.
On the partition holding the operating system, you can attempt running CHKDSK.
To launch CHKDSK,
- Put the installation disc in.
- Restart the computer and use the installation disc to boot up.
- Select a language.
- After the command, type and push Enter by pressing Shift + F10.
CHKDSK x: / f / r, where x denotes the corresponding drive
3. Perform SFC Scan
Another way that this error could appear is if there are problems with your system files.
Using the built-in repair tool in Windows is an additional possible solution to this problem. To find out if the issue resolves itself, run the SFC scan.
To run SFC Scan,
- Put the installation disc in.
- Restart the computer and use the installation disc to boot up.
- Select a language.
- After the command, type and push Enter by pressing Shift + F10.
"SFC/Scannow"
4. Update Drivers
System incompatibilities can sometimes result in blue screen issues. The device drivers are solely responsible for the hardware on your computer.
Incorrect driver installation may be one of the causes of a corrupted page error caused by malfunctioning hardware. Installing the most recent drivers will be the advised solution for this.
The majority of issues and glitches are fixed with the most recent drivers, enabling error-free system operation.
5. Update BIOS
The firmware that keeps a PC functional is called Basic Input Output System (BIOS). A corrupted page error and malfunctioning hardware are only two of the issues that might arise from an outdated BIOS.
It has been reported by several users that changing the BIOS can resolve this issue.
You can find information on BIOS updates in the motherboard handbook. Extreme caution must be used when carrying out this technique.
6. Check Ventilation
The computer's interior becomes clogged with dust and other environmental debris, making ventilation difficult. Because of this, the system may overheat, which could cause a hardware malfunction or corrupted page error.
Therefore, in order to resolve this BSOD, you must verify that your computer is adequately ventilated by thoroughly cleaning each component.
Make sure to clean the fan, heatsink, ports, and other vents in particular. Replace the thermal paste as well, if you can.
7. Uninstall Apps
Blue screen issues, such as malfunctioning hardware or corrupted pages, can undoubtedly be caused by third-party software. Thus, this problem can be resolved by locating and removing the application.
If the program appears out of the blue, it may be difficult to identify the issue. You must look through the recently installed programs in this situation.
8. Remove Peripheral Devices
If you have several peripheral devices attached, you may have a corrupted page error due to defective hardware. Remove every device except for the primary input and restart the computer.
You can try reconnecting each device to see if it resolves the issue. Proceed one by one until the malfunctioning equipment is identified.
9. Disable Antivirus
This error may also be caused by incompatibilities between the antivirus program and other programs. not just antivirus software but also firewall solutions.
Therefore, turning off the antivirus program for a while can resolve this issue. If it was successful, you ought to remove the troublesome antivirus and use a different one.
Recall that Windows comes with built-in Windows Defender security, so even if your machine isn't equipped with any third-party antivirus software, it won't leave it vulnerable.
10. Reinstall Windows
If, after trying every solution, you are still getting corrupted pages or defective hardware, it's time to reinstall Windows.
Windows reinstallation is a simple solution for problems that the CHKDSK and SFC scan are unable to resolve.
You should be aware that any files stored on the C drive will be erased if your operating system is installed on it. Therefore, take sure to backup any crucial files before beginning this operation.
No comments:
Post a Comment